Powdercoat safe brake dust remover?

[Payne]

I changed pads on my Atom yesterday from race pads to HPS. I tried to clean the wheels while I had them off, and it was impossible to get some of the race pad dust off.

Any recommendations on a product that will remove the race pad dust from the TD wheels without destroying the powdercoat?

Thanks,
Jason

[bolus]

Its like an enamel coating, hard as hell, so feel free to use something like simple green http://www.simplegreen.com/products_all_wheel.php with a good scrub then follow with clay bar if still seeing problems.
http://www.amazon.com/gp/product/B004UQQPTK

Then coat with some brake dust repellent like this http://www.amazon.com/Michelin%C2%AE.../dp/B005HF3SHK

I used it once on one wheel and used another wheel as a control. limited brake dust buildup by about 50%

[Payne]

Its like an enamel coating, hard as hell, so feel free to use something like simple green http://www.simplegreen.com/products_all_wheel.php with a good scrub then follow with clay bar if still seeing problems.
http://www.amazon.com/gp/product/B004UQQPTK

Then coat with some brake dust repellent like this http://www.amazon.com/Michelin%C2%AE.../dp/B005HF3SHK

I used it once on one wheel and used another wheel as a control. limited brake dust buildup by about 50%

I got a bottle of this - http://www.amazon.com/gp/product/B003UT3S6Q My detailer swears by it. I'll ask him about the repellent.

Thanks,
Jason

[bolus]

good stuff too. You'll probably need to clay bar out the most stubborn stuff though.