Results 1 to 5 of 5
Like Tree1Likes
  • 1 Post By cvjoint

Thread: Driveability question

  1. #1

    Driveability question

    After dialing in the suspension and tire pressures on my AA3, I've seemingly created an issue. As a reference I've got 225/245 Hoosier A7s frt/rear with tire pressures at 18/22 psi cold and 20/24 psi hot, -2/-2.5 degrees camber frt/rear, and 3 mm toe-in frt/rear. The issue is now the car is uncomfortably unstable with what I'd call a severe tramlining condition. I started with the OEM recommended 2 mm toe-out, but that was extremely unstable on all but smooth pavement under both braking and on the level. With 3 mm toe-in it's somewhat better, but not good. I haven't started experimenting with front tire pressures.

    An obvious direction would be to increase the caster, but that being not adjustable I don't really want to fabricate some new A=arms. In all of the experience with the owners tracking their cars, has anyone run into this and found a solution? I appreciate your input.
    Last edited by timcking; August 8, 2021 at 04:14 PM.

  2. #2
    Positron cvjoint's Avatar
    Join Date
    Mar 2017
    Location
    San Francisco
    Posts
    533
    Country
    United States
    Quote Originally Posted by timcking View Post
    After dialing in the suspension and tire pressures on my AA3, I've seemingly created an issue. As a reference I've got 225/245 Hoosier A7s frt/rear with tire pressures at 18/22 psi cold and 20/24 psi hot, =2/-2.5 degrees camber frt/rear, and 3 mm toe-in frt/rear. The issue is now the car is uncomfortably unstable with what I'd call a severe tramlining condition. I started with the OEM recommended 2 mm toe-out, but that was extremely unstable on all but smooth pavement under both braking and on the level. With 3 mm toe-in it's somewhat better, but not good. I haven't started experimenting with front tire pressures.

    An obvious direction would be to increase the caster, but that being not adjustable I don't really want to fabricate some new A=arms. In all of the experience with the owners tracking their cars, has anyone run into this and found a solution? I appreciate your input.
    Assuming that 2 degrees of front camber is negative, all seems ok settings wise. Most likely worn out rod ends, loose suspension parts, or bent suspension parts.

  3. #3
    Electron
    Join Date
    Jun 2013
    Location
    DFW
    Posts
    134
    Country
    United States
    I run 18f/22r cold, which gets to 22f/26r hot on track, this is with A7s and R7s. I'm surprised you're doing toe-in both front and rear. The guys I track with run toe-out in front, and toe-in on the rears.

    My personal alignment settings that I have stuck with for quite some time are:
    100mm ride height front and rear
    -2.0 degrees camber front and rear
    1/16" toe OUT on fronts
    1/8" toe IN on rears

    Not sure if that's helpful, but you may want to try those toe settings.

  4. #4
    Positron cvjoint's Avatar
    Join Date
    Mar 2017
    Location
    San Francisco
    Posts
    533
    Country
    United States
    Toe out in front helps turn in for sure, but it is more nervous on braking and high speed stability is poor. I went from toe out, to toe in, to 0 toe, and then back to toe in. I'm trading off some performance to make sure I make out safe now that I'm touching 140mph at some tracks.
    texevora likes this.

  5. #5
    Thanks for the info. I re-checked the components and no wear, play, or damage. I'm at spec ride height. Looks like I'm going to have to do some experimenting. I'll start with dialing back some of the toe-in. Has anyone experienced a problem with turn-in on their Atom? I can't imagine that.

Similar Threads

  1. question on my atom
    By jkearns in forum Welcome New Members! You MUST post here first to activate your account!
    Replies: 2
    Last Post: February 3, 2020, 07:29 AM
  2. Quick question from the new guy
    By ShakaShaun in forum US Ariel Atom 2 (Brammo) Technical Discussion
    Replies: 7
    Last Post: May 17, 2018, 06:44 AM
  3. Dash 2 question
    By RollingThunder in forum General Ariel Atom Discussion (for all UK and US versions)
    Replies: 9
    Last Post: March 7, 2018, 08:21 PM
  4. Question for AA expert
    By gkennedy in forum General Ariel Atom Discussion (for all UK and US versions)
    Replies: 3
    Last Post: April 2, 2014, 04:28 PM
  5. Question for everyone
    By spinmetals in forum Welcome New Members! You MUST post here first to activate your account!
    Replies: 9
    Last Post: March 17, 2013, 03:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •