2017 Ariel Nomad

**cvjoint** · May 4, 2018, 02:53 PM

Originally Posted by Dbwy

Yes. The pulley was pretty close to the frame, but everything fit. You should contact Chris at CT, he can give you details. I also have some pics somewhere when I did the install. I can find and send them if needed. You will want to upgrade the clutch also.

Those were useful pointers, just talked to CT. The only issues we couldn't iron out were tune/ecu and fuel pump. Do you use your stock pump at 10psi? That was my last Q.

Sorry to derail thread.

**Dbwy** · May 4, 2018, 08:49 PM

Haha, no worries. 10psi seems like a lot. I believe I was around 8psi with a 3.15" or 2.95" pulley (I can't remember). Keep in mind anything 10 or above will require some mods with map sensor and such. I ran the stock fuel pump and it was fine. You will want to get a dyno tune anyway, there are a lot of good Honda tuners out there.